1. TU-A Timing TemperingTire Vulcanizing Machine
Voltage: 220V
Power: 420W×2

Repair Range: motorcars' and minibuses' vacuum tires
TU-A timing tempering tire vulcanizingmachine has a pre-set temperature whose figure can be adjusted. The temperatureadjuster is located near the sandbag with a numerical display. The maximalrepairing area can reach 80×70 ㎜². If operating for 10hours in a row, it only consumes 1-2 kilowatt-hours of energy. It is botheconomical and convenient to use. When the inner tube is being repaired thelower surface is heated with a temperature of 140-150 ℃. If it is for the outer tube, either the uppersurface or the lower or both are heated with a temperature of 160-170 ℃. Turn on the switch on the uppersurface or the lower or both and the temperature will rise automatically. Therepair duration lasts about 8-10 minutes.

2. TU-D Automatic Constant Temperature Practical Tire Repair Machine
Voltage: 220V
Power: 500W
Automatic Temperature Control: 165±15℃;

Repair Range: all kindsof inner tubes
TU-D automatic constant temperaturepractical tire repair machine is nimble to use, economical and durable with anautomatic temperature control system. It can complete the tire repair under theautomatic temperature control conditions to achieve the best smoothness effect.

3. TU-1 Automatic Timing Temperature Tire Repair Machine
Voltage: 220V
Power: 500W
Automatic Temperature Control: 165±15℃
Vulcanization Time: ≤7 minutes

Repair Range:all kinds of inner tubes
TU-1 automatic timing temperature tirerepair machine is nimble to use, economical and durable with an automatictemperature control system.

4. TU-2 Pointer Medium Tire Vulcanizer
Voltage: 220V
Power: 420W×2

Repair Range: motorcars' and minibuses' vacuum tires
TU-2 pointer medium tire vulcanizer has a pre-set temperature whose figure can beadjusted. The temperature adjuster is located near the sandbag with a numericaldisplay. The maximal repairing area can reach 80×70 ㎜².If operating for 10 hours in a row, it only consumes 1-2 kw/hof energy. It is both economical and convenient to use. When the inner tube isbeing repaired the lower surface is heated with a temperature of 140-150 ℃. If it is for the outer tube, eitherthe upper surface or the lower or both are heated with a temperature of 160-170 ℃. Turn on the switch on the uppersurface or the lower or both and the temperature will rise automatically. Therepair duration lasts about 8-10 minutes.

5. TU-3 Car Tire Vulcanizer
Voltage: 220V
Power: 500W
Automatic Temperature Control: 165±15℃;

Repair Range: smallouter tubes
TU-3 car tire vulcanizer is nimble to use, economical and durable with an automatic control system and amanual adjustment. It can complete the tire repair under the automatictemperature control conditions to achieve the best smoothness effect. The sixaluminum films with clamps can be covered over the heating heads according tothe different positions of the repairing areas (say the tire cushion, the tirehead or the tire side).

6. TU-Z Tilting Tire Vulcanizing Machine
Voltage: 220V
Power: 500W×2
Automatic Temperature Control: 165±15℃
The Time Range:≤120minutes

Repair Range: outertubes of small cars
TU-Z tilting tire vulcanizing machinenimble to use, economical and durable with an automatic control system, a120-minute heating and a turning angle of 90°. The six aluminum films withclamps can be covered over the heating heads according to the differentpositions of the repairing areas (say the tire cushion, the tire head or thetire side).

7. TU-5 Vertical 6 Moulds Temperature Tire Repair Machine
Voltage: 220V
Power: 500W×2
Automatic Temperature Control: 165±15℃
The Time Range:≤180mins

Repair Range: smallouter tubes
TU-5 vertical 6 moulds temperature tire repair machine is durable with anautomatic temperature control system, a 180-minute heating and an alarmwarning. It can complete the tire repair under the automatic temperaturecontrol conditions to achieve the best smoothness effect. The six aluminumfilms with clamps can be covered over the heating heads according to thedifferent positions of the repairing areas (say the tire cushion, the tire heador the tire side).

8. TU-G Large Tire Vulcanizer
Voltage: 220V
Current: 20A
Total Power: 4.5KW
Insulation Testing: ≥20MΩ
Control Temperature Range: 0~200℃
Shape Dimension: 12000×1000×780mm
Weight: 280kg

TU-G large tire vulcanizer ia applicable to tires above650-16 or below 1200-20. All engineering and mechanical tires with a breadthless than 360mm can bevulcanized. It is highly efficient, energy-saving, safe and environmentallyfriendly with a constant temperature and an automatic control system. Tiresvulcanized by this machine do not experience aging or deformation. Explosiveholes, large or small, to any part of the tire can be vulcanized. Thevulcanization's quality is guaranteed to make the repaired tires functionnormally.

We are professional manufacturer andsupplier of tire vulcanizer in China. We offera variety of manufacture timing tempering tire vulcanizing machine, automaticconstant temperature practical tire repair machine, tilting tire vulcanizingmachine, and large tire vulcanizer. We possess over20 years' experience of producing, selling and serving. Our company's productshave been exported to Sweden,United States, Canada, Venezuela,Russia, Czech,Belgium, Brazil, Netherlands,Finland, South Africa, New Zealand, Thailand,Egypt, Georgia, Myanmar,Panama, Moldova, and Australia. Each month, nearly 40 cabinets ofproducts are exported to different countries in the world. And we offer OEMservice. If you need tire vulcanizer, please contactus and we hope you can visit our factories by yourselves.